Installation of Windows with Unetbootin won't finish

Loaded an ISO with Win Server 2008 R2 onto a flash drive using Unetbootin. Booted just fine, went through most of the install process, server reboots just before "completing installation" then after rebooting goes back to the first screen. Installation doesn't ever complete.

Attempting to boot into hard drive results in blue screens.

Any ideas?

My only other option is PXE booting since this server has no disk drive.

This is the blue screen I receive:

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for any BIOS udpates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advance Startup Options, and then select Safe Mode.

Technical information:

*** STOP: 0x0000001E (0x0000000000000, etc, etc)

UPDATE (9/18/2014): Thank you Pat for your suggestion to use "Serva". It worked beautifully.

My only other option is PXE booting since this server has no disk drive

You can PXE install your OS with Microsoft WDS (runs as a server service) or for a much simpler approach you can give Serva a try (I'm related to Serva development) and you'll get your OS net installed in no time.