When I switch on the PC and system boots/starts with Windows XP Professional OS, I'm able to see the Windows XP logo and with progress bar processing But after the logo and processing I'm not getting the Welcome or Login screen immediately my PC is getting restarted automatically.
PC On -> Windows XP logo processing screen -> Auto Restarting the PC -> Windows Xp logo processing screen -> Automatically restart
What I tried:
I'm getting a blue screen with the following information.
Blue screen information:
"A problem has been detected and Windows has been shutdown to prevent Damage to your computer IRQL_NOT_LESS_OR_EQUAL
....
...
...
....
Disable BIOS Memory options such as Caching or Shadowing.
....
....
....
STOP: 0x0000000A (0xF000E987, 0x00000002, 0x00000001, 0x808247A4)"
I would request if anyone could help me with proper resolution and suitable solution other than Formatting/Clean installation option for the same.
As I tried with Safe mode, Safe mode with Command Prompt and multiple options but system is auto restarting. Nothing is worked out. My system configuration is:
Microsoft Windows XP Professional with Service Pack-3, 32 bit
I get this when I have an unstable overclock. Sounds like the processor has gone bad. If you can get into windows for any length of time, run prime95 and see if it goes red. If it does, it'll confirm the processor isn't working properly.
To get over this during an OC, I either drop the bclk or up the vcore voltage. You can try this and see if it helps, but only do that if you know what you are doing because you can burn out your hardware very easily if you don't. I understand you aren't running an overclock but attacking the processor in the same manner may make the system stable.
Run memtest for 24 hours anyway. It won't hurt!
This BSOD can also be driver related, but as you are booting from disc and still getting it, I'd say it's likely the processor.
User contributions licensed under CC BY-SA 3.0