Windows 8 - Mapping Network Drive (NAS)

Question

Windows 8 - Mapping Network Drive (NAS)

This question has been asked throughout the web, but I am simply not able to get it working.

I am Running Windows 8 Pro (x64), when I connect to the office network, I can connect to all network shares except the ones that is on our (NAS).

As soon as I boot into Windows 7, I am able to connect.

So far I have tried the following:

All of the above with no success.

I also tried the net use command, to see if it might return additional info, but i get Error 53

net use k: \\omsmds001\
System error 53 has occurred.
The network path was not found.

and

net use k: \\10.0.25.3
System error 53 has occurred.
The network path was not found.

When i ping the device i get no response

When i try and browse the network location, i get an error:

Windows Cannot access \\omsmds001
Error Code: 0x80070035
The network path was not found

I have disabled "SecureNegotiate" and i can't enable SMB on the device, it is out of my control.

UPDATE I have had some luck here: I connected to a server that is on the domain, i pinged the server again and received a different IP address. I used that IP address and i am now able to map the disk with the IP. using host name still fails in windows 8.

windows

windows-8

network-shares

nas

asked on Super User Jan 15, 2013 by

stoic • edited Mar 20, 2017 by

Community

6 Answers

IP address

Check Windows 7 and Windows 8 are using same subnet and gateway. Use following command
```
ipconfig
```
If Windows 7 can ping the device, Windows 8 should be able to also.
Turn off firewall

In file explorer, go to following and turn off firewall
```
Control Panel\All Control Panel Items\Windows Firewall
```
If you have other firewall software like norton360, you will have to disable it within those software.
Check file sharing is enable

In file explorer, go to following
```
Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings
```
Under section All Networks, check File sharing connections, select Enable file sharing for devices that use 40- or 56-bit encryption
Check remembered credentials

In file explorer, go to
```
Control Panel\All Control Panel Items\Credential Manager
```
Click Windows Credentials. Check if there are credential related to that NAS, delete it.
WiFi and Wired

If you have both w-fi and cable connection, try turn off wi-fi.

answered on Super User Jan 20, 2013 by

John Siu • edited Jan 21, 2013 by

John Siu

As I understand it, you need to map a share on a NAS, you cannot map the NAS itself. So try

net use k: \\omsmds001\nameOfTheSharedFolder

Whether or not your share works with the name (as opposed to the IP address) could depend on various factors, such as

your DNS setup - does the configured DNS server know about the NAS's name?
the WINS setup - is there a WINS server in your network
the Windows Domain setup - are you part of a domain, does the domain controller know the NAS name, does the NAS know your domain controller and is part of the domain

answered on Super User Jan 24, 2013 by

Stefan Seidel

SO my NAS by dlink couldn't be seen wither and Synology help was of no help either. I tried uninstalling my LAN driver, re-installing it, trying every thing on this forum:

http://forum.synology.com/enu/viewtopic.php?f=49&t=60999&p=250609#p250609

Also enabled SNMP under components/enable windows features

What I think finally helped was this:

Go to System in Win 8. This is really easy on the metro screen type system then in settings its right there. (this screen has your Windows Experience rating)

Under Computer name, domain, and work group settings to the right it says change settings. Clink this.

Under Network ID it will have 2 bubble options: This computer is part of a business netowork or part of a home computer. I chose HOME COMPUTER option. Restarted and problem solved. Good luck!

answered on Super User Mar 11, 2013 by

davefromcamp

Same problem for me, Win7 machines could see the NAS drive and shares, Win8 64 Pro could not.

If you can connect to the NAS via IP (e.g. \\\192.168.0.4 ) try adding an entry to the hosts file - it worked for me.

C:\Windows\System32\Drivers\etc\hosts

Add a line with the fixed IP address and device name, e.g.

192.168.0.4 NAS

now use file explorer to navigate to \\\NAS.

answered on Super User Aug 15, 2013 by

Rick • edited Aug 15, 2013 by

Jawa

The fix is easy:

Find your way to the registry entry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\RequireSecuritySignature
Set the parameter to 0

Microsoft acknowledges this issue and has two workarounds: "System error 2148073478," "extended error," or "Invalid Signature" error on SMB connections in Windows 8 or Windows Server 2012

answered on Super User Feb 15, 2013 by

win8man • edited Mar 4, 2013 by

slhck

I had the same problem after recently installing windows 8, and after trying several more or less complicated solutions, what fixed it was the same as davefromcamp's solution (I'm not allowed to upvote yet, but I wanted to share that this worked for me as well, and that it was a really simple solution)!

What made the trick was:

Open up "System" from the Control Panel. One way to access the control panel is to hover the mouse in the right upper or lower corner, slide the cursor to Settings, click, and then select Control Panel from the list. Click "System and Security" and then "System".
Under "Computer name, domain, and workgroup settings" click the "Change settings" link, located at the right next to an administrator shield icon.
On the first tab "Computer name", click the button that says "Network ID..." This opens up a window with only two choices.
Select "This is a home computer; it's not part of a business network". Click finish and let windows restart itself.

Hope this can help more people with the same problem!

answered on Super User Jun 15, 2013 by

amsorribes • edited Mar 20, 2017 by

Community

User contributions licensed under CC BY-SA 3.0