How to fix UNMOUNTABLE_BOOT_VOLUME (0x000000ED) on my Windows XP Dell laptop?

5

I have a Dell Latitude D410. Running Windows XP. I am receiving the STOP: 0x000000ED (0X899CF030,0XC0000185,0X00000000,0X00000000) blue screen.

Initially, I tried everything specified with the Microsoft KB articles. At this time, I was able to boot into the general safemode. I pulled the hard drive and was able to run chkdsk on it – it noted that it had fixed some errors, but I was still unable to boot.

I put a brand new hard drive into the laptop. Windows XP installation worked up until the reboot, at which time the exact same error message came back up.

What I have tried (all since the new hard drive was installed):

  • chkdsk /R
  • All suggested solutions in Microsoft KB articles
  • Reseating RAM
  • Opened laptop, reseated all connectors, looked for signs of damage (saw none)
  • Reset BIOS options to default
  • Ran the basic Dell diagnostics
  • Ran MEMTEST86+ V4.10 for 15 passes (overnight). 0 Errors

I have looked at the current entry: How can I boot XP after receiving stop error 0x000000ED - I am currently in the process of downloading the Ultimate Boot CD to use as a test, but I am not holding out a lot of hope as I really doubt this brand new hard drive is bad.

Can anyone think of other areas I am missing?

windows-xp
boot
bsod
asked on Super User Aug 18, 2010 by Neil • edited Mar 20, 2017 by Community

8 Answers

5

First thing, to disable automatic restart - After the BIOS has finished and before the Windows logo comes up, hit F8 on your keyboard and select the option "Do not restart on system failure".

That aside, as you managed to see the error - Get any Windows XP (or even Vista/7) disk and load it up. Go to the recovery console or command prompt and type

chkdsk /F

When that is finished run (I do not think you can do this from a Vista/7 disk):

fixmbr

This solves 80+% of Windows boot failures that are not driver related.

If this is caused by bad sectors in the wrong place, running the above command should avoid them and you may get to use your disk for longer, however I would advise that you get all your files off and buy a new one as soon as possible as bad sectors always lead to more before to long.... However, it could of also just been something innocent such as powercut during an update / system file being written.

answered on Super User Oct 10, 2009 by William Hilsum • edited Oct 10, 2009 by William Hilsum
4

The Unmountable Boot Volume blue screen could be caused by a number of things. Scan the RAM in the machine with a bootable piece of software called Memtest which can be downloaded here: http://www.memtest86.com/memtest86-3.5.iso.zip If it finds errors, then the RAM is faulty and needs to be replaced. If not, the it may be the hard drive is failing/failed. This will need replacing. Try another drive in the laptop and see if that fixes anything.

Hope this helps :) (I work in IT by the way and come across this problem many times)

answered on Super User Aug 18, 2010 by Dean Perry
4

Do not assume that a HDD is bad, just because you see a blue screen.

Without making any assumptions, let's diagnose whether the possible causes exist:

  1. Check if the disk is still properly working, check SMART table and do an error scan. Back-up if not...

  2. Try to run chkdsk /r on the partition(s) and check if the I/O cables are connected properly.

  3. Do a memory test, ensure that there are no errors or else replace it.

  4. As a last resort, back-up your data then do a format and reinstall...

Try an installation medium and hit SHIFT+F10, an alternative could be Hiren's Boot CD with which you can do all of the above steps as they are all provided by Hiren's Boot CD...

answered on Super User Oct 22, 2011 by Tamara Wijsman • edited Mar 20, 2017 by Community
1

This Microsoft Support page might be relevant:

When you use volumes that use the NTFS file system on integrated device electronics (IDE) drives with caching enabled, you may receive the following error message during startup:

Stop 0x000000ED
Unmountable_Boot_Volume

The normal recovery process in such a case is to run the chkdsk /r command from Recovery Console, and then continue. On OEM versions of Windows XP, the Recovery Console may not be accessible. If this fix has not been included in the OEM build of Windows XP, you may not be able to enter Recovery Console and run the chkdsk /r command for recovery.

While the cause doesn't appear to be one addressed directly by this Microsoft Support page (it's about upgrading to XP), it does have some troubleshooting tips and further links.

answered on Super User Apr 10, 2010 by ChrisF
0

The Ultimate Boot CD could help you check whether it is a hardware or a software problem. IIRC, the "Short Test" in the SeaTools software included in it would let you know if there is a problem with the hard drive itself - this can sometimes cause that particular Windows XP stop error. You would need to boot with that CD first so you can run SeaTools.

If the Short Test completes itself and says the hard drive has no errors, I would want to go with ChrisF's answer of running the chkdsk /r command in Recovery Console.

answered on Super User Apr 10, 2010 by Isxek
0

You could SpinRite on the hard drive, its not free, $89, but sometimes it can fix drive issues. Otherwise your hard drive more than likely has bad sectors and is starting to fail. Replace the hard drive and reinstall Windows.

answered on Super User Jun 26, 2011 by ThatGuyInIT
0

I had the same error, with being unable to mount the partition in Linux or Windows based Rescue disks. I was able to see the contents of the partition using NTFS4DOS from the Ultimate Boot CD collection. I was not able to fix the problem using the UBCD 5.2.6 (since it did not have Avira NTFS4DOS Personal) and hence downloaded UBCD 4.1.1 which has the same in the FS Tools/ NTFS Tools.

Running the CHKDSK from the boot option seemingly fixed the error and I'm back using the Windows XP installation just fine. :)

answered on Super User Oct 28, 2013 by Rax
0

I had an unmountable bootable volume or something like that, got xp thinkpadt43 it took me at least a day to sort out, what I did was to download Hiren’s BootCD 15.2 here- http://www.hirensbootcd.org/download/ "totally safe" and free got loadsa good gear then watched this video - http://www.youtube.com/watch?v=Ejtm7J7Wqyk as to how to load Look it is really simple once you load the cd onto your broken computer "it should load automatically" freom the menu choose xp mini then wait til it loads :-) then press the start button on the left hand corner choose the hbcd menu option "Click Browse folder" then scroll down to checkdisc. cmd then let it do its magic and take out disc and restart as normal. This is what I found that worked for me

answered on Super User Nov 1, 2013 by frankytyrone

User contributions licensed under CC BY-SA 3.0