Frequent BSoD's With Varying Errors

I have just recently finished building my computer and have had numerous problems with BSoD's. I have been getting errors about Memory_Corruption, Critical_Structure_Corruption, and IRQL_Not_Less_Or_Equal on Windows 10. Many websites have led me to believe that my RAM is at fault, but after testing with Memtest86 I found that was not the case. I attempted to use Windows "Verifier.exe," but my computer kept crashing every time I used it resulting in a Driver_Verifier_Detected_Error. It may be a faulty driver because I am using an old hard drive from a laptop, but I have had no luck in identifying any drivers that would cause a problem. I found the crash dump and sent it through WinDbg and found the problem was said to be caused by "Memory Corruption (One Bit)." If there are any further steps I should take to fix this, any help is appreciated.

First Memory Management BSoD:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

MEMORY_MANAGEMENT

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000001a (0x0000000000041792, 0xfffff6813d5675e8, 0x1000000000000000, 
0x0000000000000000)

*** ntoskrnl.exe - Address 0xfffff8024b74c480 base at 0xfffff8024b60a000 DateStamp 
0x56a849a9

First Driver Verifier BSoD:

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ITEhidCIR.sys

DRIVER_VERIFIER_DETECTED_VIOLATION

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x000000c4 (0x0000000000002004, 0xffffe001494dcd98, 0xfffff8018e1701f0, 
0xffffd0003d5db130)

*** ITEhidCIR.sys - Address 0xfffff8018e1701f0 base at 0xfffff8018e170000 DateStamp 
0x51e544ce

Edit: After running the crash dump from the Memory_Corruption error, WinDbg states for the default bucket ID "WIN8_DRIVER_FAULT" and the process name is InstallManager. Does this mean anything for the error? If it means anything, the hard drive that I am currently using is from an old laptop with much different hardware.