What is causing this Windows 10 blue screen (MEMORY_MANAGEMENT ntoskrnl.exe)?

I'm getting the following blue screen in Windows 10:

==================================================
Dump File         : 010216-40531-01.dmp
Crash Time        : 1/2/2016 8:13:36 PM
Bug Check String  : MEMORY_MANAGEMENT
Bug Check Code    : 0x0000001a
Parameter 1       : 00000000`00041201
Parameter 2       : fffff6bf`fcdc6488
Parameter 3       : 20700001`1349e025
Parameter 4       : ffffe001`5a2bf8a0
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+14f4d0
File Description  : NT Kernel & System
Product Name      : Microsoft® Windows® Operating System
Company           : Microsoft Corporation
File Version      : 10.0.10240.16590 (th1_st1.151104-1714)
Processor         : x64
Crash Address     : ntoskrnl.exe+14f4d0
Stack Address 1   : 
Stack Address 2   : 
Stack Address 3   : 
Computer Name     : 
Full Path         : C:\WINDOWS\Minidump\010216-40531-01.dmp
Processors Count  : 4
Major Version     : 15
Minor Version     : 10240
Dump File Size    : 266,288
Dump File Time    : 1/2/2016 8:24:35 PM
==================================================

I'm also getting similar errors with ntoskrnl.exe with the error "IRQL_NOT_LESS_OR_EQUAL".

Everything I've searched on this is very vague. I'm not very good at decoding these dumps. I ran MemTest86 and memory checked out. Any insight on what might be causing this?

I'm running Windows 10 on a Dell Latitude E6410.

EDIT: Dump file can be downloaded here: https://drive.google.com/file/d/0BymZO0GUQAGENXA5QVNnTkt5UVU/view

When doing Bugcheck Analysis it is important to obtain and read all output; not only that, you also need multiple dumps to cross check this output along other bug checks to avoid false positives.

Your dump reveals quite a bit, but not enough for a conclusion:

• Unknown memory management error (1a, parameter 1: 41201) occured.

  MEMORY_MANAGEMENT (1a)

  Arg1: 0000000000041201, The subtype of the bugcheck.
  

• Classified to be a driver fault that occurred during execution of audiodg.exe.

  DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
  
  PROCESS_NAME:  audiodg.exe
  

• Produced while querying virtual memory at the end of copying system service memory.

  STACK_TEXT:  
  nt!KeBugCheckEx
  nt! ?? ::FNODOBFM::'string'+0x122c8
  nt!MiQueryAddressState+0x307
  nt!MiQueryAddressSpan+0x139
  nt!MmQueryVirtualMemory+0x648
  nt!NtQueryVirtualMemory+0x25
  nt!KiSystemServiceCopyEnd+0x13
  0x00007ff9'bbdf37aa
  

  0x00007ff9'bbdf37aa is of particular interest here, because that is what is where the chain of calls originates from. However, there is no information about that because your system is not configured to take complete memory dumps:

  Mini Kernel Dump File: Only registers and stack trace are available

It's also not yet guaranteed that every dump you get results in the same, that needs to be verified.

Until you have more information, you have way too much possible solutions to try. More dumps that contain more complete information will spare you the hassle to go through all that.

But if you have some time, here is an incomplete list with no guarantees:

• Remove and reinstall your audio drivers.
• Update all your drivers
• Run RAM tests.
• Replace the RAM out of precaution.
• Remove your antivirus and consider another one.
• Make sure you are clean of viruses, malware, ...
• Run sfc /scannow and Microsoft's SUR or DISM utility to check system health.
• Reinstall your operating system.
• Keep replacing hardware till the broken piece is gone.
• ...