Analyze backtrace of Kernel panic on Android / find cause

1

I have this problem on my Samsung Galaxy Note 2 LTE with random reboots and kind of clean restarts in the kernel logs (no oops / panic, even though some usb errors) and now I got a kernel panic in the last_kmsg log. In this log I recognized 10 attempts to start the modem, which all failed and after that the kernel had a panic because the restarts timed out.

The 5.5 sec interval repeating modem start sequence:


    [11041.906148] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
    [11041.906198] c3 drivers/usb/core/inode.c: creating file 'devices'
    [11041.906237] c3 drivers/usb/core/inode.c: creating file '001'
    [11041.906584] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
    [11041.906626] c3 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e78bd108
    [11041.906702] c3 s5p-ohci s5p-ohci: created debug files
    [11041.906739] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
    [11041.906765] c3 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e78bd108
    [11041.964043] c3 s5p-ohci s5p-ohci: OHCI controller state
    [11041.964071] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
    [11041.964103] c3 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
    [11041.964134] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
    [11041.964162] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
    [11041.964189] c3 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
    [11041.964221] c3 s5p-ohci s5p-ohci: hcca frame #0005
    [11041.964246] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
    [11041.964278] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
    [11041.964308] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
    [11041.964336] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
    [11041.964367] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
    [11041.964398] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
    [11041.964455] c3 usb usb1: default language 0x0409
    [11041.964488] c3 usb usb1: udev 1, busnum 1, minor = 0
    [11041.964512] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    [11041.964544] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [11041.964576] c3 usb usb1: Product: s5p OHCI
    [11041.964596] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
    [11041.964624] c3 usb usb1: SerialNumber: s5p-ohci
    [11041.964647] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
    [11041.966018] c3 usb usb1: usb_probe_device
    [11041.966043] c3 usb usb1: configuration #1 chosen from 1 choice
    [11041.966091] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
    [11041.966433] c3 hub 1-0:1.0: usb_probe_interface
    [11041.966458] c3 hub 1-0:1.0: usb_probe_interface - got id
    [11041.966486] c3 hub 1-0:1.0: USB hub found
    [11041.966519] c3 hub 1-0:1.0: 3 ports detected
    [11041.966540] c3 hub 1-0:1.0: standalone hub
    [11041.966561] c3 hub 1-0:1.0: no power switching (usb 1.0)
    [11041.966588] c3 hub 1-0:1.0: global over-current protection
    [11041.966613] c3 hub 1-0:1.0: power on to power good time: 4ms
    [11041.966646] c3 hub 1-0:1.0: local power source is good
    [11041.966670] c3 hub 1-0:1.0: no over-current condition exists
    [11041.966698] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
    [11041.967086] c3 drivers/usb/core/inode.c: creating file '001'
    [11042.065063] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
    [11042.507953] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11042.507989] c3 [TSP] DVFS On![8]Mali: Mali frequency 350
    [11042.600676] c0 max77686: id=27, org=32, val=39Mali: Mali frequency 266
    [11042.615503] c0 Mali: = regulator_set_voltage: 975000, 975000 
    [11042.616167] c0 max77686: id=29, org=22, val=1e
    [11042.616276] c3 melfas-ts 3-0048: R(M)(60) [ 0]
    [11042.617801] c0 max77686_get_voltage: id=29, val=1e
    [11042.630343] c0 ssp_sensorhub_list: 1, 1, 7, 0
    [11042.630436] c3 ssp_sensorhub_read: 1, 1, 7, 0
    [11042.700695] c0 max77686: id=27, org=39, val=32
    [11042.715058] c3 [TSP] DVFS Off!
    [11042.807917] c0 ssp_sensorhub_list: 1, 1, 7, -1
    [11042.807999] c3 ssp_sensorhub_read: 1, 1, 7, -1
    [11043.000039] c3 s5p-ohci s5p-ohci: auto-stop root hub
    [11043.115361] c0 Mali: Mali frequency 160
    [11043.115385] c0 Mali: = regulator_set_voltage: 950000, 950000 
    [11043.115994] c0 max77686: id=29, org=1e, val=1c
    [11043.117567] c0 max77686_get_voltage: id=29, val=1c
    [11043.214166] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11043.214203] c3 [TSP] DVFS On![8]
    [11043.410042] c3 [TSP] change_dvfs_lockMali: = regulator_set_voltage: 975000, 975000 
    [11043.415651] c0 max77686: id=29, org=1c, val=1e
    [11043.417257] c0 max77686_get_voltage: id=29, val=1e
    [11043.417609] c0 Mali: Mali frequency 266
    [11043.487794] c3 melfas-ts 3-0048: R(M)(60) [ 0]
    [11043.531224] c0 ssp_sensorhub_list: 1, 1, 7, 0
    [11043.531306] c3 ssp_sensorhub_read: 1, 1, 7, 0
    [11043.585046] c3 [TSP] DVFS Off!Mali: Mali frequency 160
    [11043.915385] c0 Mali: = regulator_set_voltage: 950000, 950000 
    [11043.915996] c0 max77686: id=29, org=1e, val=1c
    [11043.917558] c0 max77686_get_voltage: id=29, val=1c
    [11043.955037] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11043.955078] c3 [TSP] DVFS On![8]
    [11043.989765] c3 melfas-ts 3-0048: R(M)(60) [ 0]
    [11044.050699] c0 max77686: id=27, org=32, val=39
    [11044.065060] c3 hub 1-0:1.0: hub_suspend
    [11044.065093] c3 usb usb1: bus auto-suspend
    [11044.065116] c3 s5p-ohci s5p-ohci: suspend root hub
    [11044.085068] c3 [TSP] DVFS Off!
    [11044.200723] c0 max77686: id=27, org=39, val=32Mali: = regulator_set_voltage: 975000, 975000 
    [11044.215657] c0 max77686: id=29, org=1c, val=1e
    [11044.217220] c0 max77686_get_voltage: id=29, val=1e
    [11044.217566] c0 Mali: Mali frequency 266
    [11044.349513] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11044.349561] c3 [TSP] DVFS On![8]
    [11044.408454] c3 melfas-ts 3-0048: R(M)(60) [ 0]
    [11044.505054] c3 [TSP] DVFS Off!
    [11044.970054] c0 ssp_sensorhub_list: 1, 1, 7, -1
    [11044.970135] c3 ssp_sensorhub_read: 1, 1, 7, -1
    [11045.163119] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11045.163158] c3 [TSP] DVFS On![8]
    [11045.209960] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: Mali frequency 160
    [11045.290403] c0 Mali: = regulator_set_voltage: 950000, 950000 
    [11045.291016] c0 max77686: id=29, org=1e, val=1c
    [11045.292608] c0 max77686_get_voltage: id=29, val=1c
    [11045.300662] c0 max77686: id=27, org=32, val=39
    [11045.305045] c3 [TSP] DVFS Off!
    [11045.400714] c0 max77686: id=27, org=39, val=32
    [11045.772455] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11045.772496] c3 [TSP] DVFS On![8]
    [11045.850770] c0 max77686: id=27, org=32, val=39
    [11045.879558] c3 melfas-ts 3-0048: R(M)(60) [ 0]
    [11045.950749] c0 max77686: id=27, org=39, val=32
    [11045.975049] c3 [TSP] DVFS Off!Mali: = regulator_set_voltage: 975000, 975000 
    [11046.100654] c0 max77686: id=29, org=1c, val=1e
    [11046.102222] c0 max77686_get_voltage: id=29, val=1e
    [11046.102574] c0 Mali: Mali frequency 266
    [11046.418723] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11046.418761] c3 [TSP] DVFS On![8]
    [11046.591588] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: Mali frequency 160
    [11046.600385] c3 Mali: = regulator_set_voltage: 950000, 950000 
    [11046.600990] c0 max77686: id=29, org=1e, val=1c
    [11046.602552] c0 max77686_get_voltage: id=29, val=1c
    [11046.690049] c3 [TSP] DVFS Off!Mali: = regulator_set_voltage: 975000, 975000 
    [11046.700650] c0 max77686: id=29, org=1c, val=1e
    [11046.702213] c0 max77686_get_voltage: id=29, val=1e
    [11046.702560] c0 Mali: Mali frequency 266
    [11047.017412] c0 ssp_sensorhub_list: 1, 1, 7, 0
    [11047.017545] c3 ssp_sensorhub_read: 1, 1, 7, 0
    [11047.094593] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11047.094632] c3 [TSP] DVFS On![8]
    [11047.171336] c3 mdm_modem_ioctl: Powering on mdm
    [11047.171361] c3 request_boot_lock_set
    [11047.171383] c3 mdm_do_soft_power_on: soft resetting mdm modem
    [11047.171409] c3 mdm_peripheral_disconnect
    [11047.171497] c3 s5p-ohci s5p-ohci: remove, state 4
    [11047.171532] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
    [11047.171572] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
    [11047.171607] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
    [11047.171636] c3 usb usb1: unregistering device
    [11047.171658] c3 usb usb1: unregistering interface 1-0:1.0
    [11047.172032] c3 usb usb1: usb_disable_device nuking all URBs
    [11047.186272] c3 s5p-ohci s5p-ohci: OHCI controller state
    [11047.186303] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
    [11047.186339] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
    [11047.186372] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
    [11047.186399] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
    [11047.186426] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
    [11047.186460] c3 s5p-ohci s5p-ohci: hcca frame #0411
    [11047.186486] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
    [11047.186517] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
    [11047.186547] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
    [11047.186576] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
    [11047.186607] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
    [11047.186637] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
    [11047.186715] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
    [11047.205665] c3 s5p-ohci s5p-ohci: still being used(18)
    [11047.220402] c3 Mali: Mali frequency 160
    [11047.220427] c3 Mali: = regulator_set_voltage: 950000, 950000 
    [11047.221033] c0 max77686: id=29, org=1e, val=1c
    [11047.222593] c0 max77686_get_voltage: id=29, val=1c
    [11047.240041] c3 mdm_peripheral_connect
    [11047.240504] c3 set hsic lpa phy init
    [11047.240556] c3 s5p-ehci s5p-ehci: usb phy usage(18)
    [11047.240580] c3 s5p-ehci s5p-ehci: Already power on PHY
    [11047.240606] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
    [11047.240646] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
    [11047.240677] c3 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
    [11047.240708] c3 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
    [11047.240747] c3 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
    [11047.240805] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller
    [11047.240892] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
    [11047.240962] c3 drivers/usb/core/inode.c: creating file 'devices'
    [11047.241003] c3 drivers/usb/core/inode.c: creating file '001'
    [11047.241497] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
    [11047.241616] c3 s5p-ehci s5p-ehci: park 0
    [11047.241657] c3 s5p-ehci s5p-ehci: support lpm
    [11047.241698] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
    [11047.241733] c3 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
    [11047.290052] c3 [TSP] change_dvfs_lock
    [11047.300635] c0 max77686: id=27, org=32, val=39
    [11047.349497] c3 melfas-ts 3-0048: R(M)(60) [ 0]
    [11047.445028] c3 [TSP] DVFS Off!
    [11047.552955] c3 melfas-ts 3-0048: P(M)(60) [ 0]
    [11047.552991] c3 [TSP] DVFS On![8]
    [11047.572045] c3 s5p-ehci s5p-ehci: startup error -110
    [11047.572079] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered
    [11047.588162] c3 melfas-ts 3-0048: R(M)(60) [ 0]
    [11047.595394] c3 s5p-ehci s5p-ehci: Failed to add USB HCD
    [11047.595439] c3 s5p-ehci: probe of s5p-ehci failed with error -110
    [11047.595839] c3 s5p-ohci s5p-ohci: usb phy usage(22)
    [11047.595863] c3 s5p-ohci s5p-ohci: Already power on PHY
    [11047.595887] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
    [11047.595926] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
    [11047.595954] c3 s5p-ohci s5p-ohci: s5p OHCI
    [11047.596022] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs

The Kernel panic and the last attempt:


    [11093.441028] c2 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
    [11093.441075] c2 drivers/usb/core/inode.c: creating file 'devices'
    [11093.441111] c2 drivers/usb/core/inode.c: creating file '001'
    [11093.441368] c2 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
    [11093.441408] c2 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:d2309d08
    [11093.441483] c2 s5p-ohci s5p-ohci: created debug files
    [11093.441519] c2 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
    [11093.441543] c2 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:d2309d08
    [11093.499016] c2 s5p-ohci s5p-ohci: OHCI controller state
    [11093.499042] c2 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
    [11093.499073] c2 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
    [11093.499102] c2 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
    [11093.499127] c2 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
    [11093.499153] c2 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
    [11093.499184] c2 s5p-ohci s5p-ohci: hcca frame #0005
    [11093.499207] c2 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
    [11093.499236] c2 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
    [11093.499264] c2 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
    [11093.499291] c2 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
    [11093.499320] c2 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
    [11093.499350] c2 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
    [11093.499402] c2 usb usb1: default language 0x0409
    [11093.499432] c2 usb usb1: udev 1, busnum 1, minor = 0
    [11093.499455] c2 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    [11093.499485] c2 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [11093.499516] c2 usb usb1: Product: s5p OHCI
    [11093.499534] c2 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
    [11093.499561] c2 usb usb1: SerialNumber: s5p-ohci
    [11093.499581] c2 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
    [11093.500914] c2 usb usb1: usb_probe_device
    [11093.500946] c2 usb usb1: configuration #1 chosen from 1 choice
    [11093.500998] c2 usb usb1: adding 1-0:1.0 (config #1, interface 0)
    [11093.501809] c2 hub 1-0:1.0: usb_probe_interface
    [11093.501832] c2 hub 1-0:1.0: usb_probe_interface - got id
    [11093.501857] c2 hub 1-0:1.0: USB hub found
    [11093.501888] c2 hub 1-0:1.0: 3 ports detected
    [11093.501907] c2 hub 1-0:1.0: standalone hub
    [11093.501925] c2 hub 1-0:1.0: no power switching (usb 1.0)
    [11093.501948] c2 hub 1-0:1.0: global over-current protection
    [11093.501971] c2 hub 1-0:1.0: power on to power good time: 4ms
    [11093.502001] c2 hub 1-0:1.0: local power source is good
    [11093.502023] c2 hub 1-0:1.0: no over-current condition exists
    [11093.502049] c2 hub 1-0:1.0: trying to enable port power on non-switchable hub
    [11093.502442] c2 drivers/usb/core/inode.c: creating file '001'
    [11093.505713] c0 max77686: id=27, org=39, val=32
    [11093.600081] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
    [11093.681937] c0 !@Sync 369
    [11094.500032] c2 s5p-ohci s5p-ohci: auto-stop root hub
    [11095.700047] c1 mdm_subsys_powerup: mdm modem restart timed out.
    [11095.700081] c1 Kernel panic - not syncing: subsystem_restart_wq_func[d65b7b40]: Failed to powerup external_modem!
    [11095.700123] c1 Backtrace: 
    [11095.700153] c1 [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
    [11095.700190] c1  r7:ea666840 r6:c0ae38a4 r5:c0aeb090 r4:c0b99a80
    [11095.700225] c1 [] (dump_stack+0x0/0x1c) from [] (panic+0x7c/0x1b0)
    [11095.700267] c1 [] (panic+0x0/0x1b0) from [] (subsystem_restart_wq_func+0x214/0x250)
    [11095.700305] c1  r3:c0933d30 r2:d65b7b40 r1:c065d780 r0:c0934630
    [11095.700345] c1 [] (subsystem_restart_wq_func+0x0/0x250) from [] (process_one_work+0x144/0x498)
    [11095.700393] c1 [] (process_one_work+0x0/0x498) from [] (worker_thread+0x184/0x3e0)
    [11095.700437] c1 [] (worker_thread+0x0/0x3e0) from [] (kthread+0x90/0x98)
    [11095.700477] c1 [] (kthread+0x0/0x98) from [] (do_exit+0x0/0x768)
    [11095.700510] c1  r7:00000013 r6:c008f204 r5:c00ab764 r4:dbd6feb0
    [11095.700575] c0 CPU0: stopping
    [11095.700590] c0 Backtrace: 
    [11095.700613] c0 [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
    [11095.700649] c0  r7:00000004 r6:00000006 r5:c09f4000 r4:00000000
    [11095.700688] c0 [] (dump_stack+0x0/0x1c) from [] (do_IPI+0x244/0x29c)
    [11095.700727] c0 [] (do_IPI+0x0/0x29c) from [] (__irq_svc+0x80/0x15c)
    [11095.700762] c0 Exception stack(0xc09f5ee0 to 0xc09f5f28)
    [11095.700789] c0 5ee0: 211dcb1b 00000000 547c7a53 000197b4 c0b970a4 00000000 c31720a8 c0aceafc
    [11095.700827] c0 5f00: c31720b8 c0c736f0 00000000 c09f5f54 547c7a53 c09f5f28 c00b6dd8 c005ae34
    [11095.700863] c0 5f20: 800f0013 ffffffff
    [11095.700890] c0 [] (exynos4_enter_idle+0x0/0x170) from [] (cpuidle_idle_call+0xd8/0x30c)
    [11095.700930] c0  r7:c0aceafc r6:c31720a8 r5:c09f4000 r4:c31720a8
    [11095.700966] c0 [] (cpuidle_idle_call+0x0/0x30c) from [] (cpu_idle+0xc4/0x104)
    [11095.701011] c0 [] (cpu_idle+0x0/0x104) from [] (rest_init+0xa0/0xa4)
    [11095.701045] c0  r7:00000000 r6:c003b264 r5:00000000 r4:c09f4000
    [11095.701081] c0 [] (rest_init+0x0/0xa4) from [] (start_kernel+0x2b4/0x308)
    [11095.701117] c0  r5:00000000 r4:c0ac6e88
    [11095.701141] c0 [] (start_kernel+0x0/0x308) from [] (0x40008040)
    [11095.701175] c2 CPU2: stopping
    [11095.701191] c2 Backtrace: 
    [11095.701215] c2 [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
    [11095.701252] c2  r7:00000004 r6:00000006 r5:eb476000 r4:00000002
    [11095.701289] c2 [] (dump_stack+0x0/0x1c) from [] (do_IPI+0x244/0x29c)
    [11095.701328] c2 [] (do_IPI+0x0/0x29c) from [] (__irq_svc+0x80/0x15c)
    [11095.701362] c2 Exception stack(0xeb477f10 to 0xeb477f58)
    [11095.701387] c2 7f00:                                     815f545e 00000000 547c7a53 000197b4
    [11095.701426] c2 7f20: c0b970a4 00000000 c31820a8 c0aceafc c31820b8 c0c736f0 00000002 eb477f84
    [11095.701464] c2 7f40: 547c7a53 eb477f58 c00b6dd8 c005ae34 800f0013 ffffffff
    [11095.701500] c2 [] (exynos4_enter_idle+0x0/0x170) from [] (cpuidle_idle_call+0xd8/0x30c)
    [11095.701540] c2  r7:c0aceafc r6:c31820a8 r5:eb476000 r4:c31820a8
    [11095.701576] c2 [] (cpuidle_idle_call+0x0/0x30c) from [] (cpu_idle+0xc4/0x104)
    [11095.701617] c2 [] (cpu_idle+0x0/0x104) from [] (secondary_start_kernel+0x128/0x144)
    [11095.701656] c2  r7:c0b96b14 r6:10c0387d r5:00000002 r4:c0af0c84
    [11095.701690] c2 [] (secondary_start_kernel+0x0/0x144) from [] (0x40652bd4)
    [11095.701726] c2  r5:00000015 r4:65be806a
    [11095.701747] c3 CPU3: stopping
    [11095.701763] c3 Backtrace: 
    [11095.701788] c3 [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
    [11095.701824] c3  r7:00000004 r6:00000006 r5:eb49e000 r4:00000003
    [11095.701862] c3 [] (dump_stack+0x0/0x1c) from [] (do_IPI+0x244/0x29c)
    [11095.701900] c3 [] (do_IPI+0x0/0x29c) from [] (__irq_svc+0x80/0x15c)
    [11095.701934] c3 Exception stack(0xeb49ff10 to 0xeb49ff58)
    [11095.701960] c3 ff00:                                     d13e8fce 00000000 547c7a53 000197b4
    [11095.701999] c3 ff20: c0b970a4 00000000 c318a0a8 c0aceafc c318a0b8 c0c736f0 00000003 eb49ff84
    [11095.702036] c3 ff40: 547c7a53 eb49ff58 c00b6dd8 c005ae34 800f0013 ffffffff
    [11095.702073] c3 [] (exynos4_enter_idle+0x0/0x170) from [] (cpuidle_idle_call+0xd8/0x30c)
    [11095.702113] c3  r7:c0aceafc r6:c318a0a8 r5:eb49e000 r4:c318a0a8
    [11095.702149] c3 [] (cpuidle_idle_call+0x0/0x30c) from [] (cpu_idle+0xc4/0x104)
    [11095.702191] c3 [] (cpu_idle+0x0/0x104) from [] (secondary_start_kernel+0x128/0x144)
    [11095.702229] c3  r7:c0b96b14 r6:10c0387d r5:00000003 r4:c0af0c84
    [11095.702264] c3 [] (secondary_start_kernel+0x0/0x144) from [] (0x40652bd4)
    [11095.702300] c3  r5:00000015 r4:57fcc06a
    [11095.802071] c1 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
    [11095.802102] c1 Rebooting in 1 seconds..
    [11096.799086] c1 sec_reboot (104, emergency)

After that, the bootloader starts.

Here is the complete last_kmsg log.

How can I get a memory dump (that is needed as far as I understood from reading about desktop linux kernel debugging) to analyze the exact cause of the panic with crash or bt on my Android device or is their another way to resolve the backtrace?
Or should I even do something different to find out if this is a hardware problem or what software part is wrong telling from the current log alone?

Any help is much appreciated!

fightcookie

android
linux-kernel
crash
crash-dumps
panic
asked on Stack Overflow Dec 11, 2014 by xuiqzy • edited Dec 11, 2014 by xuiqzy

0 Answers

Nobody has answered this question yet.


User contributions licensed under CC BY-SA 3.0