I just added additional 1gb port to my existing 4gbs on my server. All 4 are placed on a NET CARD PCIE 1GB E1G44HTBLK 904223 INTEL
and the additional one is connected to motherboard(S5520SC) integrated Ethernet port.
from dmidecode I can see the motherboard ports are enabled. but I cannot see the connected port with ifconfig, and nothig in /var/log/messages
Handle 0x0023, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel 82575EB
Handle 0x0024, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Intel 82575EB
ifconfig
bond0 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4
inet addr:x.x.x.x Bcast:x.x.x.x Mask:255.255.255.248
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:356266699619 errors:4899 dropped:528376 overruns:11111 frame:3777
TX packets:770040754939 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:25080396598186 (22.8 TiB) TX bytes:1144989523839935 (1.0 PiB)
eth2 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:90733983446 errors:20 dropped:3789 overruns:3788 frame:14
TX packets:192583010696 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8227697516058 (7.4 TiB) TX bytes:286322118658675 (260.4 TiB)
eth3 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:87451584571 errors:2358 dropped:3818 overruns:3817 frame:1765
TX packets:192424188435 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5575531106457 (5.0 TiB) TX bytes:286131201457181 (260.2 TiB)
eth4 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:87860330643 errors:0 dropped:2226 overruns:2225 frame:0
TX packets:192355678079 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5553458398180 (5.0 TiB) TX bytes:286034980164619 (260.1 TiB)
eth5 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:90220801151 errors:2521 dropped:1282 overruns:1281 frame:1998
TX packets:192677878108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5723709589219 (5.2 TiB) TX bytes:286501224120930 (260.5 TiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8791645789 errors:0 dropped:0 overruns:0 frame:0
TX packets:8791645789 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7098296699652 (6.4 TiB) TX bytes:7098296699652 (6.4 TiB)
ethtool -i eth0
driver: igb
version: 4.0.17
firmware-version: 2.0, 0x2b820001
bus-info: 0000:01:00.0
ethtool -i eth1
driver: igb
version: 4.0.17
firmware-version: 2.0, 0x2b820001
bus-info: 0000:01:00.1
ethtool -i eth2
driver: igb
version: 4.0.17
firmware-version: 3.0, 0x619f0001
bus-info: 0000:03:00.0
ethtool -i eth3
driver: igb
version: 4.0.17
firmware-version: 3.0, 0x619f0001
bus-info: 0000:03:00.1
ethtool -i eth4
driver: igb
version: 4.0.17
firmware-version: 3.0, 0x619f0001
bus-info: 0000:03:00.2
ethtool -i eth5
driver: igb
version: 4.0.17
firmware-version: 3.0, 0x619f0001
bus-info: 0000:03:00.3
ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: no
ethtool eth1
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: no
ethtool eth2
Settings for eth2:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: yes
ethtool eth3
Settings for eth3:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
ethtool eth4
Settings for eth4:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
ethtool eth5
Settings for eth5:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
If this file exists, /etc/udev/rules.d/70-persistent-net.rules then remove it. Now create your own /etc/sysconfig/network-scripts/ifcfg-eth6 file. Also make sure that, all the network addresses updated promptly in the respective config files.
Else, you can append your new network device details in this file, /etc/udev/rules.d/70-persistent-net.rules
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="xx:xx:xx:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth5"
Are you sure you are not configured bonding? From the above, it seems that you are with bonding enabled. If bonding enabled for interfaces, it wont show any ip's.
User contributions licensed under CC BY-SA 3.0