0xC0AA0205: The drive reported that it is in the process of becoming ready. Please try the request again later.[1]
0xC0AA0206: The media is currently being formatted. Please wait for the format to complete before attempting to use the media.[1]
0xC0AA0207: The drive reported that it is performing a long-running operation, such as finishing a write. The drive may be unusable for a long period of time.[1]
0xC0AA0208: The drive reported that the combination of parameters provided in the mode page for a MODE SELECT command were not supported.[1]
0xC0AA0209: The drive reported that the media is write protected.[1]
0xC0AA020A: The feature page requested is not supported by the device.[1]
0xC0AA020B: The feature page requested is supported, but is not marked as current.[1]
0xC0AA020C: The drive does not support the GET CONFIGURATION command.[1]
0xC0AA020D: The device failed to accept the command within the timeout period. This may be caused by the device having entered an inconsistent state, or the timeout value for the command may need to be increased.[1]
0xC0AA020E: The DVD structure is not present. This may be caused by incompatible drive/medium used.[1]
0xC0AA020F: The media's speed is incompatible with the device. This may be caused by using higher or lower speed media than the range of speeds supported by the device.[1]
0xC0AA0210: The device associated with this recorder during the last operation has been exclusively locked, causing this operation to failed.[1]
0xC0AA0212: The media is not formatted. Please format the media before attempting to use it.[1]
0xC0AA02FF: The device reported unexpected or invalid data for a command.[1]
0xC0AA0300: The write failed because the drive did not receive data quickly enough to continue writing. Moving the source data to the local computer, reducing the write speed, or enabling a "buffer underrun free" setting may resolve this issue.[1]
0xC0AA0301: The write failed because the drive returned error information that could not be recovered from.[1]
0x00AA0302: There is no write operation currently in progress.[1]
0xC0AA0400: There is currently a write operation in progress.[1]
0xC0AA0401: There is no write operation currently in progress.[1]
0xC0AA0402: The requested operation is only valid with supported media.[1]
0xC0AA0403: The provided stream to write is not supported.[1]
0xC0AA0404: The provided stream to write is too large for the currently inserted media.[1]
0xC0AA0405: Overwriting non-blank media is not allowed without the ForceOverwrite property set to VARIANT_TRUE.[1]
0xC0AA0406: The current media type is unsupported.[1]
0xC0AA0407: This device does not support the operations required by this disc format.[1]
0xC0AA0606: Only blank CD-R/RW media is supported.[1]
0xC0AA0607: Only blank CD-R/RW media is supported.[1]
0xC0AA0609: There is not enough space on the media to add the provided session.[1]
0xC0AA060A: You cannot prepare the media until you choose a recorder to use.[1]
0xC0AA060D: The provided audio stream is not valid.[1]
0xC0AA060E: The requested data block type is not supported by the current device.[1]
0xC0AA060F: The stream does not contain a sufficient number of sectors in the leadin for the current media.[1]
0xC0AA0610: This device does not support the operations required by this disc format.[1]
0x80AA0900: The format is currently using the disc recorder for an erase operation.
Please wait for the erase to complete before attempting to set or clear the
current disc recorder.[1]
0x80AA0901: The erase format only supports one recorder. You must clear the current
recorder before setting a new one.[1]
0x80AA0902: The drive did not report sufficient data for a READ DISC INFORMATION command.
The drive may not be supported, or the media may not be correct.[1]
0x80AA0903: The drive did not report sufficient data for a MODE SENSE (page 0x2A) command.
The drive may not be supported, or the media may not be correct.[1]
0x80AA0904: The drive reported that the media is not erasable.[1]
0x80AA0906: The drive did not complete the erase in one hour. The drive may require a power cycle, media removal, or other manual intervention to resume proper operation.[1]
0x80AA0907: The drive returned an unexpected error during the erase. The the media may be
unusable, the erase may be complete, or the drive may still be in the process
of erasing the disc.[1]
0x80AA0908: The drive returned an error for a START UNIT (spinup) command. Manual intervention may be required.[1]
0xC0AA0909: The current media type is unsupported.[1]
0xC0AA090A: This device does not support the operations required by this disc format.[1]